Skip to main content

 

Eptura Knowledge Center

Health check

A series of tests can be run from the Health Check screen to check network connectivity and NTP server details of a V3 desk booking screen.

The health check is supported by desk screens on 8.1.40 or later. 

Check the network

  1. To open the admin menu tap and hold the clock on the device for over a second to display the PIN pad. Enter the PIN to continue.
  2. From the admin menu tap Health Check.
    hcc1-admin-menu.png
  3. Tap Network Details.
    hc3-section-button-pressed.png
  4. Wait whilst the endpoints are tested.
    hc1-7-testing-endpoints-please-wait_v1.png
    1. If unsuccessful, ‘Failed to reach the network’ is displayed with an option to Try again.
      hc5-failed-to-reach-network.png
    2. If some or all of the checks are successful, the network details list is displayed.
      hc6-network-details-all-data.png
      Unsuccessful tests are indicated by a red line.
      hc7-network-details-partial-data.png

Check the strength of the RSSI Wi-Fi signal

Follow the steps to check the strength of the RSSI signal from the Health Check screen.

The RSSI signal strength is a negative number so -60 dMb is stronger than -70 dMb.

  1. To open the admin menu tap and hold the clock on the device for over a second to display the PIN pad. Enter the PIN to continue.
  2. From the admin menu tap Health Check.
    hcc1-admin-menu.png
  3. Tap Network Details.
    hc3-section-button-pressed.png
  4. Wait whilst the endpoints are tested.
    hc1-7-testing-endpoints-please-wait_v1.png
  5. The network details list displays the strength of the RSSI signal and the color indicates if the signal strength is Good (green), Weak (amber), or Poor (red).
    desk-health-rssi-good_v1.png
    RSSI of -60 dBm or better is Good (green)

    desk-health-rssi-weak_v1.png
    RSSI of -61 to -65 dBm is Weak (amber)

    desk-health-rssi-poor_v1.png
    RSSI of -66 dBm or lower is Poor (red)

The RSSI signal strength is also indicated by the color of the Wi-Fi icon on the device. Learn more about the desk booking screen display

Check connectivity

  1. To open the admin menu tap and hold the clock on the device for over a second to display the PIN pad. Enter the PIN to continue.
  2. From the admin menu tap Health Check.
    hcc1-admin-menu.png
  3. Tap Connectivity.
    hcc3-connectivity-pressed.png
  4. Wait whilst the endpoints are tested.
    hc1-7-testing-endpoints-please-wait_v1.png
    1. If unsuccessful, ‘Failed to reach the network’ is displayed with an option to Try again.
      hc5-failed-to-reach-network.png
    2. If some or all of the checks are successful, the HTTPS connections, NTP Server connections and HTTPS calendar service details are displayed.
      hcc6a-connections-ok-whole-list.png
      Unsuccessful connections are displayed in red.
      hcc7a-connections-mix-of-ok-and-fail-whole-list.png