Skip to main content
Eptura Knowledge Center

Configure Workplace Sensors

Level: Administrator

Administrators can configure the sensors that you use in their organization.

Add a Sensor

  1. Navigate to Admin > Space > Sensors. The Configure Sensors screen displays.

clipboard_ec112bd4eaca2ccd0dc032515b4713242.png

  1. From a Building drop-down, select a building.
  2. Click the Add Sensor button. The new sensor line displays.

clipboard_ec9e3f6435839f039cb40768592a85bc7.png

  1. In the Space field, browse and select the space where the sensor is located.
  2. In the Sensor ID field, enter the sensor's identity number.
  3. In the Notes field, enter a short note.
  4. From the Vendor drop-down, select the sensor's vendor.
  5. From the Type drop-down, select the sensor type.
  6. Click the Save button.

Edit a Sensor

  1. Hover over the sensor to display the Edit and Move icons. 
  2. Click the Edit button. The Senor line changes to the edit mode.
  3. You can edit the notes, vendor, and sensor type.
  4. When you have finished, click the Save button.

Move a Sensor

You can also make changes to existing sensors.

  1. Hover over the sensor to display the Edit and Move icons. 
  2. Click the Move Sensor Move Sensor button - Admin module.png icon. The Choose a new space for sensor dialog displays.
  3. In the space field, either enter in the space name or click the Browse button to navigate to the space where the sensor is located.
  4. Click the Save button. The sensor location has been moved.

Move a Sensor.gif


After the location is selected, click the Save button. The sensor is assigned to the new location.

Delete a Sensor

If a sensor was added incorrectly, such as with an incorrect sensor ID or vendor, you can easily delete it.

  1. For the sensor you want to delete, click the Delete Remove button - Sensor Admin.png icon. A confirmation message displays "Are you sure you want to unassign this sensor?"
  2. Click the Yes button.

Delete a Sensor.gif

For more information about implementing sensors at your facility, contact your Account Manager.