Skip to main content

Sensor Mode - Enhanced Space Utilization Analytics

Last updated: Mon, 10 Aug 2020 15:08:50 GMT
iOFFICE Knowledge Center

Sensor Mode - Enhanced Space Utilization Analytics

This article describes the new enhanced sensor utilization analytics and how they are calculated by building, floor, and space.

Space Calculation

 

1_Single_Space.gif

 

Average Utilization Calculation

Minutes the sensor was active divided by the total center hours in the selected time

 

Peak Utilization Calculation

Highest Average Utilization in a single hour in the selected time

 

For each calculation, multiple days are averaged together by an hour. The Utilization Trends graph is a visual of the Avg. Utilization and Peak Utilization. Peak Utilization will be a visible bar in the graph. Average Utilization will be equivalent to all the bars summed, and then divided by the number of bars

 

Floor Calculation

 

2_Floor.gif

 

Average Utilization Calculation

Minutes the sensor was active divided by the total center hours in the selected time for the whole floor.

 

Peak Utilization Calculation

Highest Average Utilization in a single hour in the selected time for the whole floor.

 

Building Calculation

 

3_Building.gif

 

Average Utilization Calculation

Minutes the sensor was active divided by the total center hours in the selected time for the whole building.

 

Peak Utilization Calculation

Highest Average Utilization in a single hour in the selected time for the whole building.

 

All Buildings Calculation

 

4_All_Buildings.gif

 

All Building Level Utilization Information tab shows the same calculations as the building level, values are calculated with sensor data from all buildings. Data is shown on a 24-hour time span, rather than center hours.

 

Headcount Calculation

 

5_Headcount_Space.gif

 

If a building, floor or room has headcount sensors, a second y-axis and an additional data point will be added to the information tab. The line graph is the simultaneous maximum headcount. This is the greatest number of people the headcount sensor counted in a single minute within the hour. Avg headcount is the average of the simultaneous maximum by the hour. The red bar is the room capacity.

Headcount Floor

 

6_Headcount_Floor.gif

Similar to the single space, the utilization trends graph will show the simultaneous maximum headcount. All headcount values across the entire level (floor, building, etc) are totaled up by the minute, and the maximum is taken by the hour. Avg headcount is the same, an average of all simultaneous maximums.

 

Most and Least Used

 

At the floor level, scrolling down the information pane reveals the Most used and Least Used Shared Spaces. These are the top 10 and bottom 10 shared spaces. The space is occupiable and has a capacity greater than 1. For floors with a small number of shared spaces, rooms may appear in both lists.

7_most_and_least.gif

  • Was this article helpful?